Skip To Content
864-766-5240 Request a Quote

Products

Request Information
An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
Unit of Measure

Specifications

Direct Current (DC) Voltage Rating

 N/A 800 kV

Temperature Range

 N/A -269 to 450 ºC

Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 500 psig34 bar

Number of Pins

 N/A 10

Installation

 N/A Weld

Welding Type

 N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding

Conductor

Conductor Current Rating

 N/A 5 A

Material

Housing Material

 N/A 304 Stainless Steel

Pin Material

 N/A Alumel

Insulation Material

 N/A Alumina Ceramic

Magnetic Material

 N/A true

Additional Information

Additional Information

 N/A In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate:
  • High temperatures
  • Cryogenic temperatures
  • High pressure
  • Aggressive chemicals
A feedthrough is basically defined by the requirements for installation, insulation, and conductor material. The method of interconnection is flexible and left to the customer’s discretion. A selection of push on contacts can be found in the Accessories section of this catalog.

Extreme/Custom Design

Extreme/Custom Design

 N/A
  • Multiple feedthrough flange assemblies
  • 940-pin header assembly
  • Corona-free designs to 180 kV DC
  • Currents in excess of 2,500 Amps
  • Pressures to 30,000 psig

Applications

Applications

 N/A A few of the many applications in which these feedthroughs are commonly used are:
  • Semiconductor processing equipment
  • Particle accelerators
  • Furnaces
  • Analytical equipment
  • In-vacuum coating
  • Satellite instrumentation
  • X-ray detection equipment

New Products

New Products

 N/A
  • New high-density, low current feedthroughs
  • Micro & Mini HV (high voltage) feedthroughs with mating air side cable assemblies
  • 40 & 50 kV feedthroughs with mating air side cable assemblies
  • 0.154 & 0.250 Power Plugs for safe high voltage and high current connectivity

Accessories

Accessories

 N/A Part Number - 21621-01-A
Insulation Diameter - 0.028
Wire Length - 30 ft
Wire Diameter - 7 x 0.005
Type - Stranded
Gauge - 28 AWG
Conductor Current - 2.5
Direct Current (DC) Voltage - 850 V

Part Number - 21643-01-A
Insulation Diameter - 0.035
Wire Length - 30 ft
Wire Diameter - 19 x 0.0063
Type - Stranded
Gauge - 22 AWG
Conductor Current - 5
Direct Current (DC) Voltage - 850 V

Part Number - 21702-02-A
Insulation Diameter - 0.101
Wire Length - 15 ft
Wire Diameter - 37 x 0.013
Type - Stranded
Gauge - 12 AWG
Conductor Current - 20
Direct Current (DC) Voltage - 850 V

Part Number - 21128-01
Description - Adjustable wire stripper, 20-30 AWG (0.25 - 0.80 mm)

Part Number - 11259-06-X
Description - Accepts wire up to 0.050 [1.3]
Material - Alumel
Type - 0.062 Crimp Contacts

Part Number - 2840-05
Description - For 0.025 - 0.075 in. Crimp Diameters[0.76]
Type - Crimp Tool

Features

Features

 N/A Accelerators Cryogenics Fusion High Current High Energy Physics High Temperature High Voltage Laser Technology Microwave Nuclear Photovoltaic Semiconductor Equipment Superconductivity Ultra-High Vacuum