Microdot® connectors are the smallest standard threaded interface connectors we offer for use in Ultra-High Vacuum (UHV). CeramTec’s standard Microdot® connectors are available as single ended or double ended units.
MHV (Miniature High Voltage) Connectors are designed for high-voltage applications of BNC connectors (DC voltage between 500 V and 5 kV). MHV connectors are sometimes referred to as "high-voltage BNCs." CeramTec's standard MHV connectors are available as single ended or double ended units with a floating shield or a grounded shield.
Type N series connectors are the most popular medium-sized connectors, accommodating voltages up to 1.5 kV. The threaded coupling provides low noise and increases resistance to shock and vibration. Matched impedance designs are also available and are ideally suited for high frequency signal transmission above 6 GHz. CeramTec's standard Type N connectors are available as single or double ended units.
HN series connectors are Type N series connectors that have been designed to take higher voltages (up to 7 kV). These matched impedance designs are ideally suited for high frequency signal transmission or fast rise time pulses for data transmission.
SHV (Safe High Voltage) Connectors feature an improved interface over the MHV. The SHV outer contact ground connection is maintained through the center contact mating cycle. The center contact is recessed to prevent shock hazard when disengaged. Four designs are included in this Product Guide covering DC voltages from 5 kV to as high as 20 kV.
The BSHV version is a bakeable SHV connector that exhibits the safety level of the SHV.
SHV (Safe High Voltage) Connectors feature an improved interface over the MHV. The SHV outer contact ground connection is maintained through the center contact mating cycle. The center contact is recessed to prevent shock hazard when disengaged. Four designs are included in this Product Guide covering DC voltages from 5 kV to as high as 20 kV.
SHV (Safe High Voltage) Connectors feature an improved interface over the MHV. The SHV outer contact ground connection is maintained through the center contact mating cycle. The center contact is recessed to prevent shock hazard when disengaged. Four designs are included in this Product Guide covering DC voltages from 5 kV to as high as 20 kV.
CeramTec coaxial connectors consist of two concentric conductors: a central conductor surrounded by and insulated from a second tubular conductor. The outside conductor is usually at ground potential but in some product variations may be floated off ground by employing an additional insulating ring. The outer conducting surface can prevent radio frequency noise from passing to or from the central conductor.
CeramTec coaxial connectors consist of two concentric conductors: a central conductor surrounded by and insulated from a second tubular conductor. The outside conductor is usually at ground potential but in some product variations may be floated off ground by employing an additional insulating ring. The outer conducting surface can prevent radio frequency noise from passing to or from the central conductor.
SMB (Subminiature Type-B) connectors are designed for quick connecting and disconnecting. This is made possible by the SMB's spring retention connector. CeramTec's standard SMB connectors are single ended and available with a grounded shield or a floating shield configuration.
SMA (Subminiature Type-A) connectors offer a threaded interface in a subminiature size. Matched impedance designs are also available and are ideally suited for high frequency signal transmission above 10 GHz. CeramTec's standard SMA connectors are available as single ended or double ended units.
BNC connectors are the most popular miniature-sized connector and can accommodate up to 500 V DC. The BNC is characterized by its quick connect/disconnect bayonet coupling. Matched impedance designs are also available and are ideally suited for high frequency signal transmission. CeramTec's standard BNC connectors are available as single or double ended units with a grounded shield or a floating shield.
BNC connectors are the most popular miniature-sized connector and can accommodate up to 500 V DC. The BNC is characterized by its quick connect/disconnect bayonet coupling. Matched impedance designs are also available and are ideally suited for high frequency signal transmission. CeramTec's standard BNC connectors are available as single or double ended units with a grounded shield or a floating shield.
