Skip To Content
864-766-5240 Request a Quote

Products

An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.

Request Information
Unit of Measure
Items
1 Kilovolt (kV) Direct Current (DC) Voltage Rating, 5 Ampere (A) Conductor Current Rating, and 3 to 41 Pin Multi-Pin Header Feedthroughs

3 Pin and Straight Pin Type and Weld Installation Multipin Header Feedthrough
1 Kilovolt (kV) Direct Current (DC) Voltage Rating, 5 Ampere (A) Conductor Current Rating, and 3 to 41 Pin Multi-Pin Header Feedthroughs

32 Pin and Straight Pin Type and Weld Installation Multipin Header Feedthrough
1 Kilovolt (kV) Direct Current (DC) Voltage Rating, 5 Ampere (A) Conductor Current Rating, and 3 to 41 Pin Multi-Pin Header Feedthroughs

41 Pin and Straight Pin Type and Weld Installation Multipin Header Feedthrough
3 Pins and Straight Pin Type and International Organization for Standardization (ISO) Flange Installation Multi-Pin Header Feedthrough (17040-01-KF)

3 Pin and Straight Pin Type and International Organization for Standardization (ISO) Flange Installation Multipin Header Feedthrough
3 Pins and Straight Pin Type and International Organization for Standardization (ISO) Flange Installation Multi-Pin Header Feedthrough (17040-01-KF)

32 Pin and Straight Pin Type and International Organization for Standardization (ISO) Flange Installation Multipin Header Feedthrough
Direct Current (DC) Voltage Rating N/A 1 kV
Current Rating Per Pin N/A 5 A
Temperature Range N/A -269 to 450 ºC N/A -269 to 450 ºC N/A -269 to 450 ºC N/A -25 to 205 ºC N/A -25 to 205 ºC
Pressure at 20 Degree Celsius (ºC) Temperature N/A 550 psig38 bar N/A 375 psig26 bar N/A 350 psig24 bar N/A 550 psig N/A 375 psig
Number of Pins N/A 3 N/A 32 N/A 41 N/A 3 N/A 32
Pin Type N/A Straight
Pin Size N/A 0.040 in1.0 mm
Installation N/A Weld N/A Weld N/A Weld N/A International Organization for Standardization (ISO) Flange N/A International Organization for Standardization (ISO) Flange
Installation Size N/A N/A N/A N/A NW25KF N/A NW40KF
Flange Size N/A
Plating N/A Nickel
Welding Type N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A N/A
Dimension A N/A 0.745 in N/A 1.370 in N/A 1.495 in N/A 0.745 in N/A 1.370 in
Housing Material N/A 304 Stainless Steel
Pin Material N/A 304 Stainless Steel
Insulation Material N/A Glass-Ceramic
Magnetic Material N/A false
Additional Information N/A In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate:
  • High temperatures
  • Cryogenic temperatures
  • High pressure
  • Aggressive chemicals
A feedthrough is basically defined by the requirements for installation, insulation, and conductor material. The method of interconnection is flexible and left to the customer’s discretion. A selection of push on contacts can be found in the Accessories section of this catalog.
Extreme/Custom Design N/A
  • Multiple feedthrough flange assemblies
  • 940-pin header assembly
  • Corona-free designs to 180 kV DC
  • Currents in excess of 2,500 Amps
  • Pressures to 30,000 psig
Applications N/A A few of the many applications in which these feedthroughs are commonly used are:
  • Semiconductor processing equipment
  • Particle accelerators
  • Furnaces
  • Analytical equipment
  • In-vacuum coating
  • Satellite instrumentation
  • X-ray detection equipment
New Products N/A
  • New high-density, low current feedthroughs
  • Micro & Mini HV (high voltage) feedthroughs with mating air side cable assemblies
  • 40 & 50 kV feedthroughs with mating air side cable assemblies
  • 0.154 & 0.250 Power Plugs for safe high voltage and high current connectivity
Accessories N/A Part Number - 16167-03-A
Description - Accepts wire up to 0.040 [1.0]
Material - Copper Alloy - Gold Flash
Type - 0.040 Crimp Contacts

Part Number - 2840-05
Description - For 0.025 - 0.075 in. Crimp Diameters
Type - Crimp Tool
Features N/A Accelerators Cryogenics Fusion High Current High Energy Physics High Temperature High Voltage Laser Technology Microwave Nuclear Photovoltaic Semiconductor Equipment Superconductivity Ultra-High Vacuum