Skip To Content
864-766-5240 Request a Quote

Products

An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
Request Information
Unit of Measure
Items
12 to 15 Kilovolt (kV) Direct Current (DC) Voltage Rating, Up to 185 Ampere (A) Conductor Current Rating, and 1 to 4 Pin Power Plug Feedthroughs

1 Pin and Weld Installation Power Plug Feedthrough
12 to 15 Kilovolt (kV) Direct Current (DC) Voltage Rating, Up to 185 Ampere (A) Conductor Current Rating, and 1 to 4 Pin Power Plug Feedthroughs

1 Pin and Weld Installation Power Plug Feedthrough
12 to 15 Kilovolt (kV) Direct Current (DC) Voltage Rating, Up to 185 Ampere (A) Conductor Current Rating, and 1 to 4 Pin Power Plug Feedthroughs

1 Pin and Weld Installation Power Plug Feedthrough
12 to 15 Kilovolt (kV) Direct Current (DC) Voltage Rating, Up to 185 Ampere (A) Conductor Current Rating, and 1 to 4 Pin Power Plug Feedthroughs

1 Pin and Weld Installation Power Plug Feedthrough
1 Pin and International Organization for Standardization (ISO) Installation and NW16KF Installation Size Power Plug Feedthrough (21308-02-KF)

1 Pin and International Organization for Standardization (ISO) Installation and NW16KF Installation Size Power Plug Feedthrough
Direct Current (DC) Voltage Rating1 N/A 12 kV N/A 12 kV N/A 15 kV N/A 15 kV N/A 15 kV
Conductor Current Rating N/A 56 A N/A 185 A N/A 56 A N/A 185 A N/A 56 A
Temperature Range N/A -269 to 450 ºC N/A -269 to 450 ºC N/A -269 to 450 ºC N/A -269 to 450 ºC N/A -25 to 205 ºC
Pressure at 20 Degree Celsius (ºC) Temperature N/A 750 psig52 bar N/A 750 psig52 bar N/A 750 psig52 bar N/A 750 psig52 bar N/A
Number of Pins N/A 1
Pin Material N/A Nickel N/A Copper N/A Nickel N/A Copper N/A Nickel
Installation N/A Weld N/A Weld N/A Weld N/A Weld N/A International Organization for Standardization (ISO) Flange
Installation Size N/A N/A N/A N/A N/A NW16KF
Flange Size N/A
Welding Type N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A
Dimension L N/A 1.0 in N/A 1.0 in N/A 0.75 in N/A 0.75 in N/A 0.75 in
Housing Material N/A 304 Stainless Steel
Insulation Material N/A Alumina Ceramic
Magnetic Material N/A true
Additional Information N/A In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate:
  • High temperatures
  • Cryogenic temperatures
  • High pressure
  • Aggressive chemicals
A feedthrough is basically defined by the requirements for installation, insulation, and conductor material. The method of interconnection is flexible and left to the customer’s discretion. A selection of push on contacts can be found in the Accessories section of this catalog.
Extreme/Custom Design N/A
  • Multiple feedthrough flange assemblies
  • 940-pin header assembly
  • Corona-free designs to 180 kV DC
  • Currents in excess of 2,500 Amps
  • Pressures to 30,000 psig
Applications N/A A few of the many applications in which these feedthroughs are commonly used are:
  • Semiconductor processing equipment
  • Particle accelerators
  • Furnaces
  • Analytical equipment
  • In-vacuum coating
  • Satellite instrumentation
  • X-ray detection equipment
New Products N/A
  • New high-density, low current feedthroughs
  • Micro & Mini HV (high voltage) feedthroughs with mating air side cable assemblies
  • 40 & 50 kV feedthroughs with mating air side cable assemblies
  • 0.154 & 0.250 Power Plugs for safe high voltage and high current connectivity
Accessories N/A Part Number - 20956-02-A
Name - Air Side Cable Assembly
Maximum Temperature ºC- 125
Minimum Temperature ºC - -55
Conductor Current - 100
Direct Current (DC) Voltage - 25 kV
Length - 8 ft
Cable Type - 6 AWG
Type - 0.250 Power Plug

Part Number - 7332-06-A
Name - Contacts
Description - Accepts wire up to 0.250 [6.4]
Material - Beryllium Copper
Type - 0.250 Barrel Type Contacts

Part Number - 18740-01-A
Name - Contacts
Description - Accepts wire up to 0.250 [6.4]
Material - Copper
Type - 0.250 Clamp Type Contacts
Features N/A Accelerators Cryogenics Fusion High Current High Energy Physics High Temperature High Voltage Laser Technology Microwave Nuclear Photovoltaic Semiconductor Equipment Superconductivity Ultra-High Vacuum
  • 1 When used with air side cable assembly.