CeramTec North America, LLC.
CeramTec North America, LLC.
Mailing Address:
One Technology Place
Laurens, SC 29360

Tel: 864-766-5240
Email: sales@ceramtec.com
Website: https://shop.ceramtec.us
Print Back
An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
Up to 5 Kilovolt (kV) Direct Current (DC) Voltage Rating, 5 Ampere (A) Conductor Current Rating, and 4 to 10 Pin Header Feedthroughs
Up to 5 Kilovolt (kV) Direct Current (DC) Voltage Rating, 5 Ampere (A) Conductor Current Rating, and 4 to 10 Pin Header Feedthroughs - 2
Unit of Measure
Items Up to 5 Kilovolt (kV) Direct Current (DC) Voltage Rating, 5 Ampere (A) Conductor Current Rating, and 4 to 10 Pin Header Feedthroughs
10234-01-W
4 Pin and -269 to 450 Degree Celsius (ºC) Temperature Range Pin Header Feedthrough 		Up to 5 Kilovolt (kV) Direct Current (DC) Voltage Rating, 5 Ampere (A) Conductor Current Rating, and 4 to 10 Pin Header Feedthroughs
10235-01-W
6 Pin and -269 to 450 Degree Celsius (ºC) Temperature Range Pin Header Feedthrough 		Up to 5 Kilovolt (kV) Direct Current (DC) Voltage Rating, 5 Ampere (A) Conductor Current Rating, and 4 to 10 Pin Header Feedthroughs
10236-01-W
10 Pin and -269 to 450 Degree Celsius (ºC) Temperature Range Pin Header Feedthrough 		4 Pins and -25 to 205 Degree Celsius (ºC) Temperature Range Pin Header Feedthrough (10234-13-KF)
10234-13-KF
4 Pin and -25 to 205 Degree Celsius (ºC) Temperature Range Pin Header Feedthrough 		4 Pins and -25 to 205 Degree Celsius (ºC) Temperature Range Pin Header Feedthrough (10234-13-KF)
10235-13-KF
6 Pin and -25 to 205 Degree Celsius (ºC) Temperature Range Pin Header Feedthrough
Direct Current (DC) Voltage Rating N/A 1.5 kV N/A 1.5 kV N/A 800 kV N/A 1.5 kV N/A 1.5 kV
Conductor Current Rating N/A 5 A
Temperature Range N/A -269 to 450 ºC N/A -269 to 450 ºC N/A -269 to 450 ºC N/A -25 to 205 ºC N/A -25 to 205 ºC
Pressure at 20 Degree Celsius (ºC) Temperature N/A 600 psig41 bar N/A 550 psig38 bar N/A 500 psig34 bar N/A N/A
Number of Pins N/A 4 N/A 6 N/A 10 N/A 4 N/A 6
Installation N/A Weld N/A Weld N/A Weld N/A International Organization for Standardization (ISO) Flange N/A International Organization for Standardization (ISO) Flange
Installation Size N/A N/A N/A N/A NW16KF N/A NW16KF
Flange Size N/A
Welding Type N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A N/A
Housing Material N/A 304 Stainless Steel
Pin Material N/A Alumel
Insulation Material N/A Alumina Ceramic
Magnetic Material N/A true
Additional Information N/A In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate:
  • High temperatures
  • Cryogenic temperatures
  • High pressure
  • Aggressive chemicals
A feedthrough is basically defined by the requirements for installation, insulation, and conductor material. The method of interconnection is flexible and left to the customer’s discretion. A selection of push on contacts can be found in the Accessories section of this catalog.
Extreme/Custom Design N/A
  • Multiple feedthrough flange assemblies
  • 940-pin header assembly
  • Corona-free designs to 180 kV DC
  • Currents in excess of 2,500 Amps
  • Pressures to 30,000 psig
Applications N/A A few of the many applications in which these feedthroughs are commonly used are:
  • Semiconductor processing equipment
  • Particle accelerators
  • Furnaces
  • Analytical equipment
  • In-vacuum coating
  • Satellite instrumentation
  • X-ray detection equipment
New Products N/A
  • New high-density, low current feedthroughs
  • Micro & Mini HV (high voltage) feedthroughs with mating air side cable assemblies
  • 40 & 50 kV feedthroughs with mating air side cable assemblies
  • 0.154 & 0.250 Power Plugs for safe high voltage and high current connectivity
Accessories N/A Part Number - 21621-01-A
Insulation Diameter - 0.028
Wire Length - 30 ft
Wire Diameter - 7 x 0.005
Type - Stranded
Gauge - 28 AWG
Conductor Current - 2.5
Direct Current (DC) Voltage - 850 V

Part Number - 21643-01-A
Insulation Diameter - 0.035
Wire Length - 30 ft
Wire Diameter - 19 x 0.0063
Type - Stranded
Gauge - 22 AWG
Conductor Current - 5
Direct Current (DC) Voltage - 850 V

Part Number - 21702-02-A
Insulation Diameter - 0.101
Wire Length - 15 ft
Wire Diameter - 37 x 0.013
Type - Stranded
Gauge - 12 AWG
Conductor Current - 20
Direct Current (DC) Voltage - 850 V

Part Number - 21128-01
Description - Adjustable wire stripper, 20-30 AWG (0.25 - 0.80 mm)

Part Number - 11259-06-X
Description - Accepts wire up to 0.050 [1.3]
Material - Alumel
Type - 0.062 Crimp Contacts

Part Number - 2840-05
Description - For 0.025 - 0.075 in. Crimp Diameters[0.76]
Type - Crimp Tool
Features N/A Accelerators Cryogenics Fusion High Current High Energy Physics High Temperature High Voltage Laser Technology Microwave Nuclear Photovoltaic Semiconductor Equipment Superconductivity Ultra-High Vacuum