Skip To Content
864-766-5240 Request a Quote

Products

Request Information
CeramTec's multipin connector category of products describes hermetic feedthroughs of two or more conducting pins that accept plugs on the air side. Some connectors allow for plugs on the vacuum side as well. Product variations include instrumentation Sub D (MIL-C-24308) type and circular connector types MIL-C-26482 and MIL-C-5015.
Unit of Measure

Specifications

Brands

 N/A Ceramaseal®

Number of Pins

 N/A 19

Pin Type

 N/A Solder Cup

Direct Current (DC) Voltage Rating

 N/A 1 kV

Current Rating Per Pin

 N/A 5 A

Temperature Range

 N/A -269 to 450 ºC

Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 400 psig28 bar

Installation

Installation

 N/A Conflate Flange

Material

Conductor Material

 N/A 300 Series Stainless Steel (Gold Plated)

Shell Material

 N/A 304 Stainless Steel

Pin Material

 N/A 300 Series Stainless Steel (Gold Plated)

Insulation Material

 N/A Glass-Ceramic

Magnetic Material

 N/A false

Extreme/Custom Design

Extreme/Custom Design

 N/A
  • 940-pin connector using thermocouple and instrumentation leads
  • Combination multipin and coaxial connectors with a custom plug
  • Multiple combinations of circular connectors in a flange
  • Plugs bakeable to 650 ºC

Applications

Applications

 N/A A few of the many applications in which these multipin connectors are commonly used are:
  • Semiconductor processing equipment
  • Analytical test and measurement equipment
  • Pressure transducers
  • Power generation: Measurement and control
  • Particle accelerators
  • Furnaces
  • Energy research
  • Commercial and military aircraft
  • Aerospace
  • Telecommunications
  • Oil Exploration
  • R&D
  • High Energy Physics
  • Biotechnology
  • Ceramic-to-Metal

Additional Information

Additional Information

 N/A The products in this section are used primarily to provide instrumentation signals, voltage and/or current into an ultra-high vacuum environment, high pressure, or many other extreme environments, with an inline connection to outside instrumentation. Designs adapt a Ceramaseal® feedthrough (receptacle) with an industry-standard plug.

The connector assembly is characterized by the Mil Spec designation, installation method and number of pins. In situations where voltage and current requirements are moderate, CeramTec is able to achieve a very high pin density using glass-ceramic technology. CeramTec's designs include both single-ended and double-ended connector assemblies.

Advanced Ceramic-to-Metal & Glass-Ceramic Sealing Technology

Accessories

Accessories

 N/A Part Number - 16060-01-A
Name - Air Side Plug
Type - Air Side
Direct Current (DC) Voltage - 1 kV
Conductor Current - 1 A
Number of Contacts - 3
Dimension H -0.8 in [20 mm]
Dimension L -1.9 in [48 mm]

Part Number - 16060-02-A
Name - Air Side Plug
Type - Air Side
Direct Current (DC) Voltage - 1 kV
Conductor Current - 1 A
Number of Contacts - 6
Dimension H -1.0 in [25 mm]
Dimension L -1.9 in [48 mm]

Part Number - 16060-03-A
Name - Air Side Plug
Type - Air Side
Direct Current (DC) Voltage - 1 kV
Conductor Current - 1 A
Number of Contacts - 10
Dimension H -1.0 in [25 mm]
Dimension L -1.9 in [48 mm]

Part Number - 16060-04-A
Name - Air Side Plug
Type - Air Side
Direct Current (DC) Voltage - 1 kV
Conductor Current - 1 A
Number of Contacts - 19
Dimension H -1.2 in [31 mm]
Dimension L -1.9 in [48 mm]

Part Number - 16060-05-A
Name - Air Side Plug
Type - Air Side
Direct Current (DC) Voltage - 1 kV
Conductor Current - 1 A
Number of Contacts - 32
Dimension H -1.4 in [36 mm]
Dimension L -2.1 in [53 mm]

Part Number - 16060-06-A
Name - Air Side Plug
Type - Air Side
Direct Current (DC) Voltage - 1 kV
Conductor Current - 1 A
Number of Contacts - 41
Dimension H -1.5 in [38 mm]
Dimension L -2.3 in [58 mm]
Part Number - 16757-02-A

Name - Female Crimp Contacts
Description - Female accepts wire up to 0.040 in [1.0 mm]

Note - Contacts are included with all plugs