Skip To Content
864-766-5240 Request a Quote

Products

Request Information
Type N series connectors are the most popular medium-sized connectors, accommodating voltages up to 1.5 kV. The threaded coupling provides low noise and increases resistance to shock and vibration. Matched impedance designs are also available and are ideally suited for high frequency signal transmission above 6 GHz. CeramTec's standard Type N connectors are available as single or double ended units.

50 Ohm - High Frequency
Unit of Measure

Specifications

Brands

 N/A Ceramaseal®

Style

 N/A Single Ended

Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 500 psig34 bar

Impedance Rating

 N/A 50 ONon-Constant

Direct Current (DC) Voltage Rating

 N/A 1.5 kV

Conductor Current Rating

 N/A 1 A

Temperature Range

 N/A -200 to 225 ºC

Coupling

 N/A Threaded

High Frequency 50 Ohm Designs

 N/A Type N

Installation

Installation

 N/A Weld

Material

Housing Material

 N/A 304 Stainless Steel

Pin Material

 N/A Beryllium Copper

Insulation Material

 N/A Glass-Ceramic

Magnetic Material

 N/A false

Standard Specifications

Standard Specifications

 N/A
  • High frequency 50 ohm impedance matched connectors
  • Connectors sold with or without air side plugs

Extreme/Custom Design

Extreme/Custom Design

 N/A
  • Multiple coaxial and multipin connectors in a flange
  • Double ended 50 ohm coaxial connector with floating shield for a cryogenic application
  • Coaxial connectors using a glass ceramic seal for cryogenic and corrosive environments
  • LC connector, TNC connector and other military style coaxial connectors

Applications

Applications

 N/A A few of the many applications in which these coaxial connectors are commonly used are:
  • Telecommunications
  • Semiconductor processing equipment
  • Aerospace equipment
  • Medical equipment
  • Microwave
  • In-vacuum coating
  • Particle accelerators
  • Analytical equipment
  • Oil exploration
  • R&D
  • High energy physics
  • Military defense
  • Ceramic-to-Metal

New Products

New Products

 N/A
  • Floating SMA connector
  • BNC to Microdot connector
  • New 50 Ohm BNC connector design

Additional Information

Additional Information

 N/A CeramTec coaxial connectors consist of two concentric conductors: a central conductor surrounded by and insulated from a second tubular conductor. The outside conductor is usually at ground potential but in some product variations may be floated off ground by employing an additional insulating ring. The outer conducting surface can prevent radio frequency noise from passing to or from the central conductor. CeramTec's Ceramaseal® product line includes a complete line of industry-standard coaxial connectors ranging from Microdot® through SHV. These coaxial connectors are manufactured for high and ultra-high vacuum service. These coaxial connectors are manufactured for high and ultra-high vacuum service.

Advanced ceramic-to-metal & glass-ceramic sealing technology

Accessories

Accessories

 N/A Part Number - 7707-01
Name - Air Side Plug
Description - Type N Plug
Type - Air Side
Direct Current (DC) Voltage - 1.5 kV
Conductor Current - 5 A
Dimension H - 0.81 in [20 mm]
Dimension L - 1.5 in [38 mm]

Part Number - 21619-01-A
Name - Air Side Cable Assembly
Type - 50 Ohm Type N - Double Ended
Length - 10 ft
Direct Current (DC) Voltage - 1.5 kV
Conductor Current - 5 A
Minimum Temperature - -55ºC
Maximum Temperature - 85ºC

Cable - RG-59/U, RG-9/U, and RG-10/U