Skip To Content
864-766-5240 Request a Quote

Products

Request Information
Microdot® connectors are the smallest standard threaded interface connectors we offer for use in Ultra-High Vacuum (UHV). CeramTec’s standard Microdot® connectors are available as single ended or double ended units.

Low Frequency/Double Ended - Grounded Shield
Unit of Measure

Specifications

Brands

 N/A Ceramaseal® Microdot®

Type

 N/A Double Ended

Shield

 N/A Grounded

Number of Pins

 N/A 3

Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 1500 psig103 bar

Impedance Rating

 N/A Non-Constant

Direct Current (DC) Voltage Rating

 N/A 1 kV

Conductor Current Rating

 N/A 2 A

Temperature Range

 N/A -55 to 450 ºC

Coupling

 N/A Threaded

Installation

Installation Size

 N/A 2-3/4 inNW35CF

Installation

 N/A ConFlat Flange

Material

Housing Material

 N/A 304 Stainless Steel

Contact Material

 N/A 304 Stainless Steel

Insulation Material

 N/A Alumina Ceramic

Magnetic Material

 N/A true

Standard Specifications

Standard Specifications

 N/A Grounded Shield Versions

Extreme/Custom Design

Extreme/Custom Design

 N/A
  • Multiple coaxial and multipin connectors in a flange
  • Double ended 50 ohm coaxial connector with floating shield for a cryogenic application
  • Coaxial connectors using a glass ceramic seal for cryogenic and corrosive environments
  • LC connector, TNC connector and other military style coaxial connectors

Applications

Applications

 N/A A few of the many applications in which these coaxial connectors are commonly used are:
  • Telecommunications
  • Semiconductor processing equipment
  • Aerospace equipment
  • Medical equipment
  • Microwave
  • In-vacuum coating
  • Particle accelerators
  • Analytical equipment
  • Oil exploration
  • R&D
  • High energy physics
  • Military defense
  • Ceramic-to-Metal

New Products

New Products

 N/A
  • Floating SMA connector
  • BNC to Microdot connector
  • New 50 Ohm BNC connector design

Additional Information

Additional Information

 N/A CeramTec coaxial connectors consist of two concentric conductors: a central conductor surrounded by and insulated from a second tubular conductor. The outside conductor is usually at ground potential but in some product variations may be floated off ground by employing an additional insulating ring. The outer conducting surface can prevent radio frequency noise from passing to or from the central conductor. CeramTec's Ceramaseal® product line includes a complete line of industry-standard coaxial connectors ranging from Microdot® through SHV. These coaxial connectors are manufactured for high and ultra-high vacuum service. These coaxial connectors are manufactured for high and ultra-high vacuum service.

Advanced ceramic-to-metal & glass-ceramic sealing technology

Accessories

Accessories

 N/A Part Number - 14544-01-A
Name - Air Side Cable Assembly
Type - Microdot® Air Side - Single Ended
Length - 10 ft
Direct Current (DC) Voltage - 1 kV
Conductor Current Rating - 2 A
Minimum Temperature - -65 ºC
Maximum Temperature - 125 ºC

Part Number - 15767-12-A
Name - Vacuum Side Cable Assembly
Type - Microdot® Vacuum Side - Double Ended
Length - 12 ft
Direct Current (DC) Voltage - 500 V
Conductor Current Rating - 2 A
Minimum Temperature - -65 ºC
Maximum Temperature - 125 ºC

Part Number - 15767-24-A
Name - Vacuum Side Cable Assembly
Type - Microdot® Vacuum Side - Double Ended
Length - 24 ft
Direct Current (DC) Voltage - 500 V
Conductor Current Rating - 2 A
Minimum Temperature - -65 ºC
Maximum Temperature - 125 ºC

Part Number - 15767-36-A
Name - Vacuum Side Cable Assembly
Type - Microdot® Vacuum Side - Double Ended
Length - 36 ft
Direct Current (DC) Voltage - 500 V
Conductor Current Rating - 2 A
Minimum Temperature - -65 ºC
Maximum Temperature - 125 ºC

Cable - 0.08 Diameter 50-ohm