CeramTec North America LLC. - Up to 13 Kilovolt (kV) Cryogenic Electrical Isolators

Products

Electrical isolators, sometimes referred to as 'breaks' or 'envelopes', consist of metal sleeves brazed to each end of an insulating ceramic tube. These assemblies provide electrical isolation of system components that operate within a common environment. They can also be used to act as a conduit to introduce gases or liquids into hermetic systems.

Request Information

Unit of Measure

Items	0858-01-W 0.11 Inch (in) Inner Diameter 6 Kilovolt (kV) Cryogenic Electrical Isolator	17108-01-W 0.25 Inch (in) Inner Diameter 13 Kilovolt (kV) Cryogenic Electrical Isolator	8002-01-W 0.25 Inch (in) Inner Diameter 13 Kilovolt (kV) Cryogenic Electrical Isolator	8002-02-W 0.41 Inch (in) Inner Diameter 13 Kilovolt (kV) Cryogenic Electrical Isolator
Description	N/A Electrical isolators, sometimes referred to as 'breaks' or 'envelopes', consist of metal sleeves brazed to each end of an insulating ceramic tube. These assemblies provide electrical isolation of system components that operate within a common environment. They can also be used to act as a conduit to introduce gases or liquids into hermetic systems.
Installation	N/A Weld
Direct Current (DC) Voltage Rating	N/A 6 kV	N/A 13 kV	N/A 13 kV	N/A 13 kV
Pressure at 20 Degree Celsius (ºC) Temperature	N/A 1000 psi68 bar	N/A 900 psi61 bar	N/A 900 psi61 bar	N/A 400 psi27 bar
Temperature Range	N/A -269 to 450 ºC
Inner Diameter (ID)	N/A 0.11 in2.7 mm	N/A 0.25 in6.4 mm	N/A 0.25 in6.4 mm	N/A 0.41 in10 mm
Tube Material	N/A 321 Stainless Steel	N/A 304 Stainless Steel	N/A 304 Stainless Steel	N/A
Cap Material	N/A 42 Nickel Iron
Insulation Material	N/A Alumina Ceramic
Magnetic Material	N/A true
Extreme/Custom Design	N/A Voltages in excess of 180 kV Pressures to 10,000 psig Insulator IDs in excess of 15 inches Special fittings Radiation resistant Non-circular geometries Fluted configurations
Applications	N/A A few of the many applications in which these thermocouples are commonly used are: Semiconductor processing equipment Particle accelerators Furnaces Analytical equipment Beam line tubes Aerospace Telecommunications Aerospace Oil Exploration R & D High Energy Physics Military/Defense Biotechnology
New Products	N/A Newly designed water isolators with higher pressure ratings Standard non-magnetic isolators
Additional Information	N/A Cryogenic isolators are used to introduce cryogenic fluids into a system and to provide electrical isolation of line components. Water isolators are used to introduce water or other fluids into a system and to provide electrical isolation of line components. Vacuum isolators are used to provide an electrical break between the vacuum system and other external components.