CeramTec North America LLC. - 8 Kilovolt (kV) Direct Current (DC) Voltage Rating and Up to 1000 Ampere (A) Conductor Current Rating High Power/Liquid Cooled Feedthroughs

Products

An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.

Request Information

Unit of Measure

Items	17110-01-W Weld Installation High Power/Liquid Cooled Feedthrough	17111-01-KF International Organization for Standardization (ISO) Flange Installation High Power/Liquid Cooled Feedthrough	17112-01-CF ConFlat Flange Installation High Power/Liquid Cooled Feedthrough
Description	N/A An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'. CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
Direct Current (DC) Voltage Rating	N/A 8 kV
Conductor Current Rating	N/A 1000 A
Temperature Range	N/A -269 to 450 ºC	N/A -25 to 205 ºC	N/A -269 to 450 ºC
Pressure at 20 Degree Celsius (ºC) Temperature	N/A 250 psig17 bar	N/A	N/A 250 psig17 bar
Conductor Diameter	N/A 0.750 in19.0 mm	N/A	N/A
Housing Material	N/A 304 Stainless Steel
Tube Material	N/A Tellurium Copper
Fitting Material	N/A Brass
Insulation Material	N/A Alumina Ceramic
Magnetic Material	N/A true
Installation	N/A Weld	N/A International Organization for Standardization (ISO) Flange	N/A ConFlat Flange
Installation Size	N/A	N/A NW40KF	N/A NW35CF
Flange Size	N/A	N/A	N/A 2-3/4 in
Welding Type	N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding	N/A	N/A
Additional Information	N/A In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate: High temperatures Cryogenic temperatures High pressure Aggressive chemicals A feedthrough is basically defined by the requirements for installation, insulation, and conductor material. The method of interconnection is flexible and left to the customer’s discretion. A selection of push on contacts can be found in the Accessories section of this catalog.
Extreme/Custom Design	N/A Multiple feedthrough flange assemblies 940-pin header assembly Corona-free designs to 180 kV DC Currents in excess of 2,500 Amps Pressures to 30,000 psig
Applications	N/A A few of the many applications in which these feedthroughs are commonly used are: Semiconductor processing equipment Particle accelerators Furnaces Analytical equipment In-vacuum coating Satellite instrumentation X-ray detection equipment
New Products	N/A New high-density, low current feedthroughs Micro & Mini HV (high voltage) feedthroughs with mating air side cable assemblies 40 & 50 kV feedthroughs with mating air side cable assemblies 0.154 & 0.250 Power Plugs for safe high voltage and high current connectivity
Features	N/A Accelerators Cryogenics Fusion High Current High Energy Physics High Temperature High Voltage Laser Technology Microwave Nuclear Photovoltaic Semiconductor Equipment Superconductivity Ultra-High Vacuum