Skip To Content
864-766-5240 Request a Quote

Products

An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
Request Information
Unit of Measure
Items
Up to 6 Kilovolt (kV) Direct Current (DC) Voltage Rating, Up to 27 Ampere (A) Conductor Current Rating, and 1 to 4 Pin Power Feedthroughs

1 Pin 2 Kilovolt (kV) Direct Current (DC) Voltage Rating Weld Installation 304 Stainless Steel Conductor Power Feedthrough
Up to 6 Kilovolt (kV) Direct Current (DC) Voltage Rating, Up to 27 Ampere (A) Conductor Current Rating, and 1 to 4 Pin Power Feedthroughs

1 Pin 2 Kilovolt (kV) Direct Current (DC) Voltage Rating Weld Installation Nickel Conductor Power Feedthrough
Up to 6 Kilovolt (kV) Direct Current (DC) Voltage Rating, Up to 27 Ampere (A) Conductor Current Rating, and 1 to 4 Pin Power Feedthroughs

1 Pin 2 Kilovolt (kV) Direct Current (DC) Voltage Rating Weld Installation Molybdenum Conductor Power Feedthrough
Up to 6 Kilovolt (kV) Direct Current (DC) Voltage Rating, Up to 27 Ampere (A) Conductor Current Rating, and 1 to 4 Pin Power Feedthroughs

1 Pin 2 Kilovolt (kV) Direct Current (DC) Voltage Rating Weld Installation Copper Conductor Power Feedthrough
Up to 6 Kilovolt (kV) Direct Current (DC) Voltage Rating, Up to 27 Ampere (A) Conductor Current Rating, and 1 to 4 Pin Power Feedthroughs

1 Pin 5 Kilovolt (kV) Direct Current (DC) Voltage Rating Weld Installation 304 Stainless Steel Conductor Power Feedthrough
Direct Current (DC) Voltage Rating N/A 2 kV N/A 2 kV N/A 2 kV N/A 2 kV N/A 5 kV
Temperature Range N/A -269 to 450 ºC
Pressure at 20 Degree Celsius (ºC) Temperature N/A 3500 psig241 bar
Number of Pins N/A 1
Installation N/A Weld
Installation Size N/A
Flange Size N/A
Width N/A
Welding Type N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding
Conductor Current Rating1 N/A 1.8 A N/A 8.2 A N/A 13.5 A N/A 27 A N/A 1.8 A
Conductor Material N/A 304 Stainless Steel N/A Nickel N/A Molybdenum N/A Copper N/A 304 Stainless Steel
Housing Material N/A 304 Stainless Steel
Insulation Material N/A Alumina Ceramic
Magnetic Material N/A false N/A true N/A false N/A false N/A false
Additional Information N/A In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate:
  • High temperatures
  • Cryogenic temperatures
  • High pressure
  • Aggressive chemicals
A feedthrough is basically defined by the requirements for installation, insulation, and conductor material. The method of interconnection is flexible and left to the customer’s discretion. A selection of push on contacts can be found in the Accessories section of this catalog.
Extreme/Custom Design N/A
  • Multiple feedthrough flange assemblies
  • 940-pin header assembly
  • Corona-free designs to 180 kV DC
  • Currents in excess of 2,500 Amps
  • Pressures to 30,000 psig
Applications N/A A few of the many applications in which these feedthroughs are commonly used are:
  • Semiconductor processing equipment
  • Particle accelerators
  • Furnaces
  • Analytical equipment
  • In-vacuum coating
  • Satellite instrumentation
  • X-ray detection equipment
New Products N/A
  • New high-density, low current feedthroughs
  • Micro & Mini HV (high voltage) feedthroughs with mating air side cable assemblies
  • 40 & 50 kV feedthroughs with mating air side cable assemblies
  • 0.154 & 0.250 Power Plugs for safe high voltage and high current connectivity
Features N/A Accelerators Cryogenics Fusion High Current High Energy Physics High Temperature High Voltage Laser Technology Microwave Nuclear Photovoltaic Semiconductor Equipment Superconductivity Ultra-High Vacuum
  • 1 Current carrying capacity of the tubular feedthroughs varies based on the coolant used and the flow rate.