Skip To Content
864-766-5240 Request a Quote

Products

HN series connectors are Type N series connectors that have been designed to take higher voltages (up to 7 kV). These matched impedance designs are ideally suited for high frequency signal transmission or fast rise time pulses for data transmission.
Request Information
Unit of Measure
Items
International Organization for Standardization (ISO) Flange Installation Medium-Sized HN Coaxial Electrical Connector (18072-01-KF)

International Organization for Standardization (ISO) Flange Installation Medium-Sized HN Coaxial Electrical Connector
ConFlat Flange Installation Medium-Sized HN Coaxial Electrical Connector (10339-02-CF)

ConFlat Flange Installation Medium-Sized HN Coaxial Electrical Connector
Description N/A HN series connectors are Type N series connectors that have been designed to take higher voltages (up to 7 kV). These matched impedance designs are ideally suited for high frequency signal transmission or fast rise time pulses for data transmission.

50 Ohm - High Frequency
Brands N/A Ceramaseal®
Flange Size N/A N/A 2-3/4 in
Installation Size N/A NW40KF N/A NW35CF
Installation N/A International Organization for Standardization (ISO) Flange N/A ConFlat Flange
Pressure at 20 Degree Celsius (ºC) Temperature N/A N/A 320 psig22 bar
Impedance Rating N/A 50 O
Housing Material N/A 304 Stainless Steel
Pin Material N/A 70/30 Copper Nickel
Insulation Material N/A Alumina Ceramic
Magnetic Material N/A false
Direct Current (DC) Voltage Rating N/A 7 kV
Conductor Current Rating N/A 7 A
Temperature Range N/A -25 to 205 ºC N/A -269 to 450 ºC
Coupling N/A Threaded
High Frequency 50 Ohm Designs N/A HN
Standard Specifications N/A
  • High frequency 50 ohm impedance matched connectors
  • Connectors sold with or without air side plugs
Extreme/Custom Design N/A
  • Multiple coaxial and multipin connectors in a flange
  • Double ended 50 ohm coaxial connector with floating shield for a cryogenic application
  • Coaxial connectors using a glass ceramic seal for cryogenic and corrosive environments
  • LC connector, TNC connector and other military style coaxial connectors
Applications N/A A few of the many applications in which these coaxial connectors are commonly used are:
  • Telecommunications
  • Semiconductor processing equipment
  • Aerospace equipment
  • Medical equipment
  • Microwave
  • In-vacuum coating
  • Particle accelerators
  • Analytical equipment
  • Oil exploration
  • R&D
  • High energy physics
  • Military defense
  • Ceramic-to-Metal
New Products N/A
  • Floating SMA connector
  • BNC to Microdot connector
  • New 50 Ohm BNC connector design
Additional Information N/A CeramTec coaxial connectors consist of two concentric conductors: a central conductor surrounded by and insulated from a second tubular conductor. The outside conductor is usually at ground potential but in some product variations may be floated off ground by employing an additional insulating ring. The outer conducting surface can prevent radio frequency noise from passing to or from the central conductor. CeramTec's Ceramaseal® product line includes a complete line of industry-standard coaxial connectors ranging from Microdot® through SHV. These coaxial connectors are manufactured for high and ultra-high vacuum service. These coaxial connectors are manufactured for high and ultra-high vacuum service.

Advanced ceramic-to-metal & glass-ceramic sealing technology
Accessories N/A Part Number - 6524-05
Name - Air Side Plug
Description - HN Plug
Type - Air Side
Direct Current (DC) Voltage - 7 kV
Conductor Current - 10 A
Dimension H - 0.88 in [22 mm]
Dimension L - 2.4 in [61 mm]

Part Number - 7332-06-A
Name - Contacts
Description - Accepts wire up to 0.250 in [6.4 mm]
Type - 0.250 Barrel Type Contacts
Material - Beryllium Copper

Cable - RG-8/U, RG-9/U, RG-87/U, RG-213/U, RG-214/U, and RG-225/U