Skip To Content
864-766-5240 Request a Quote

Products

Microdot® connectors are the smallest standard threaded interface connectors we offer for use in Ultra-High Vacuum (UHV). CeramTec’s standard Microdot® connectors are available as single ended or double ended units.
Request Information
Unit of Measure
Items
1 Pin and Weld Installation Coaxial Electrical Connector (17614-01-W)

1 Pin and Weld Installation Coaxial Electrical Connector
1 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector (21507-01-KF)

1 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector
1 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector (21507-01-KF)

2 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector
1 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector (21507-01-KF)

3 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector
1 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector (21507-01-KF)

4 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector
Description N/A Microdot® connectors are the smallest standard threaded interface connectors we offer for use in Ultra-High Vacuum (UHV). CeramTec’s standard Microdot® connectors are available as single ended or double ended units.

Low Frequency/Single Ended - Grounded Shield
Brands N/A Ceramaseal® Microdot®
Type N/A Single Ended
Shield N/A Grounded
Number of Pins N/A 1 N/A 1 N/A 2 N/A 3 N/A 4
Installation Size N/A N/A NW16KF N/A NW40KF N/A NW40KF N/A NW40KF
Installation N/A Weld N/A International Organization for Standardization (ISO) Flange N/A International Organization for Standardization (ISO) Flange N/A International Organization for Standardization (ISO) Flange N/A International Organization for Standardization (ISO) Flange
Pressure at 20 Degree Celsius (ºC) Temperature N/A 1600 psig110 bar N/A N/A N/A N/A
Impedance Rating N/A Non-Constant
Housing Material N/A Kovar®
Pin Material N/A Molybdenum
Contact Material N/A
Insulation Material N/A Alumina Ceramic
Magnetic Material N/A true
Direct Current (DC) Voltage Rating N/A 1 kV
Conductor Current Rating N/A 2 A
Temperature Range N/A -55 to 450 ºC N/A -25 to 205 ºC N/A -25 to 205 ºC N/A -25 to 205 ºC N/A -25 to 205 ºC
Coupling N/A Threaded
Standard Specifications N/A Grounded Shield Versions
Extreme/Custom Design N/A
  • Multiple coaxial and multipin connectors in a flange
  • Double ended 50 ohm coaxial connector with floating shield for a cryogenic application
  • Coaxial connectors using a glass ceramic seal for cryogenic and corrosive environments
  • LC connector, TNC connector and other military style coaxial connectors
Applications N/A A few of the many applications in which these coaxial connectors are commonly used are:
  • Telecommunications
  • Semiconductor processing equipment
  • Aerospace equipment
  • Medical equipment
  • Microwave
  • In-vacuum coating
  • Particle accelerators
  • Analytical equipment
  • Oil exploration
  • R&D
  • High energy physics
  • Military defense
  • Ceramic-to-Metal
New Products N/A
  • Floating SMA connector
  • BNC to Microdot connector
  • New 50 Ohm BNC connector design
Additional Information N/A CeramTec coaxial connectors consist of two concentric conductors: a central conductor surrounded by and insulated from a second tubular conductor. The outside conductor is usually at ground potential but in some product variations may be floated off ground by employing an additional insulating ring. The outer conducting surface can prevent radio frequency noise from passing to or from the central conductor. CeramTec's Ceramaseal® product line includes a complete line of industry-standard coaxial connectors ranging from Microdot® through SHV. These coaxial connectors are manufactured for high and ultra-high vacuum service. These coaxial connectors are manufactured for high and ultra-high vacuum service.

Advanced ceramic-to-metal & glass-ceramic sealing technology
Accessories N/A Part Number - 14544-01-A
Name - Air Side Cable Assembly
Type - Microdot® - Single Ended
Length - 10 ft
Direct Current Voltage - 1 kV
Conductor Current - 2 A
Minimum Temperature - -65 ºC
Maximum Temperature - 125 ºC

Part Number - 14461-04-A
Name - Contacts
Description - Accepts wire up to 0.030 [0.76]
Type - 0.042 Crimp Contacts
Material - Gold Plated 300 Series Stainless Steel

Part Number - 2840-05
Name - Contacts
Description - For 0.025" - 0.075" Diameters
Type - Crimp Tool

Cable - 0.08 Diameter 50-ohm