An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
Direct Current (DC) Voltage Rating |
N/A 1 kV |
Current Rating Per Pin |
N/A 5 A |
Temperature Range |
N/A -269 to 450 ºC |
Pressure at 20 Degree Celsius (ºC) Temperature |
N/A 350 psig24 bar |
Number of Pins |
N/A 41 |
Pin Type |
N/A Solder Cup |
Pin Size |
N/A 0.040 in1.0 mm |
Installation |
N/A
Weld |
Plating |
N/A Nickel |
Welding Type |
N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding |
Housing Material |
N/A 304 Stainless Steel |
Pin Material |
N/A 304 Stainless Steel |
Insulation Material |
N/A Glass-Ceramic |
Magnetic Material |
N/A false |
Additional Information |
N/A
In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate:
A feedthrough is basically defined by the requirements for installation, insulation, and conductor material. The method of interconnection is flexible and left to the customer’s discretion. A selection of push on contacts can be found in the Accessories section of this catalog. |
Extreme/Custom Design |
N/A
|
Applications |
N/A
A few of the many applications in which these feedthroughs are commonly used are:
|
New Products |
N/A
|
