| Items |
 17614-01-W 1 Pin and Weld Installation Coaxial Electrical Connector |
 21507-01-KF 1 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector |
21525-01-KF 2 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector |
21526-01-KF 3 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector |
21527-01-KF 4 Pin and International Organization for Standardization (ISO) KF Flange Installation Coaxial Electrical Connector |
|||||
| Description |
Microdot® connectors are the smallest standard threaded interface connectors we offer for use in Ultra-High Vacuum (UHV). CeramTec’s standard Microdot® connectors are available as single ended or double ended units. Low Frequency/Single Ended - Grounded Shield |
|||||||||
| Brands | Ceramaseal® Microdot® | |||||||||
| Type | Single Ended | |||||||||
| Shield | Grounded | |||||||||
| Number of Pins | 1 | 1 | 2 | 3 | 4 | |||||
| Installation Size | NW16KF | NW40KF | NW40KF | NW40KF | ||||||
| Installation | Weld | International Organization for Standardization (ISO) Flange | International Organization for Standardization (ISO) Flange | International Organization for Standardization (ISO) Flange | International Organization for Standardization (ISO) Flange | |||||
| Pressure at 20 Degree Celsius (ºC) Temperature | 1600 psig110 bar | |||||||||
| Impedance Rating | Non-Constant | |||||||||
| Housing Material | Kovar® | |||||||||
| Pin Material | Molybdenum | |||||||||
| Contact Material | ||||||||||
| Insulation Material | Alumina Ceramic | |||||||||
| Magnetic Material | true | |||||||||
| Direct Current (DC) Voltage Rating | 1 kV | |||||||||
| Conductor Current Rating | 2 A | |||||||||
| Temperature Range | -55 to 450 ºC | -25 to 205 ºC | -25 to 205 ºC | -25 to 205 ºC | -25 to 205 ºC | |||||
| Coupling | Threaded | |||||||||
| Standard Specifications | Grounded Shield Versions | |||||||||
| Extreme/Custom Design |
|
|||||||||
| Applications |
A few of the many applications in which these coaxial connectors are commonly used are:
|
|||||||||
| New Products |
|
|||||||||
| Additional Information |
CeramTec coaxial connectors consist of two concentric conductors: a central conductor surrounded by and insulated from a second tubular conductor. The outside conductor is usually at ground potential but in some product variations may be floated off ground by employing an additional insulating ring. The outer conducting surface can prevent radio frequency noise from passing to or from the central conductor. CeramTec's Ceramaseal® product line includes a complete line of industry-standard coaxial connectors ranging from Microdot® through SHV. These coaxial connectors are manufactured for high and ultra-high vacuum service. These coaxial connectors are manufactured for high and ultra-high vacuum service. Advanced ceramic-to-metal & glass-ceramic sealing technology |
|||||||||
| Accessories |
Part Number - 14544-01-A Name - Air Side Cable Assembly Type - Microdot® - Single Ended Length - 10 ft Direct Current Voltage - 1 kV Conductor Current - 2 A Minimum Temperature - -65 ºC Maximum Temperature - 125 ºC Part Number - 14461-04-A Name - Contacts Description - Accepts wire up to 0.030 [0.76] Type - 0.042 Crimp Contacts Material - Gold Plated 300 Series Stainless Steel Part Number - 2840-05 Name - Contacts Description - For 0.025" - 0.075" Diameters Type - Crimp Tool Cable - 0.08 Diameter 50-ohm |
|||||||||
|
|
||||||||||
