CeramTec North America, LLC.
CeramTec North America, LLC.
Mailing Address:
One Technology Place
Laurens, SC 29360

Tel: 864-766-5240
Email: sales@ceramtec.com
Website: https://shop.ceramtec.us
Print Back
An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
Unit of Measure

Specifications

Direct Current (DC) Voltage Rating

 N/A 25 kV

Temperature Range

 N/A -25 to 205 ºC

Number of Pins

 N/A 2

Installation

 N/A International Organization for Standardization (ISO) Flange

Installation Size

 N/A NW40KF

Conductor

Conductor Current Rating

 N/A 185 A

Material

Pin Material

 N/A Copper

Housing Material

 N/A 304 Stainless Steel

Insulation Material

 N/A Alumina Ceramic

Magnetic Material

 N/A true

Additional Information

Additional Information

 N/A In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate:
  • High temperatures
  • Cryogenic temperatures
  • High pressure
  • Aggressive chemicals
A feedthrough is basically defined by the requirements for installation, insulation, and conductor material. The method of interconnection is flexible and left to the customer’s discretion. A selection of push on contacts can be found in the Accessories section of this catalog.

Extreme/Custom Design

Extreme/Custom Design

 N/A
  • Multiple feedthrough flange assemblies
  • 940-pin header assembly
  • Corona-free designs to 180 kV DC
  • Currents in excess of 2,500 Amps
  • Pressures to 30,000 psig

Applications

Applications

 N/A A few of the many applications in which these feedthroughs are commonly used are:
  • Semiconductor processing equipment
  • Particle accelerators
  • Furnaces
  • Analytical equipment
  • In-vacuum coating
  • Satellite instrumentation
  • X-ray detection equipment

New Products

New Products

 N/A
  • New high-density, low current feedthroughs
  • Micro & Mini HV (high voltage) feedthroughs with mating air side cable assemblies
  • 40 & 50 kV feedthroughs with mating air side cable assemblies
  • 0.154 & 0.250 Power Plugs for safe high voltage and high current connectivity

Accessories

Accessories

 N/A Part Number - 20956-02-A
Name - Air Side Cable Assembly
Maximum Temperature ºC- 125
Minimum Temperature ºC - -55
Conductor Current - 100
Direct Current (DC) Voltage - 25 kV
Length - 8 ft
Cable Type - 6 AWG
Type - 0.250 Power Plug

Part Number - 7332-06-A
Name - Contacts
Description - Accepts wire up to 0.250 [6.4]
Material - Beryllium Copper
Type - 0.250 Barrel Type Contacts

Part Number - 18740-01-A
Name - Contacts
Description - Accepts wire up to 0.250 [6.4]
Material - Copper
Type - 0.250 Clamp Type Contacts

Features

Features

 N/A Accelerators Cryogenics Fusion High Current High Energy Physics High Temperature High Voltage Laser Technology Microwave Nuclear Photovoltaic Semiconductor Equipment Superconductivity Ultra-High Vacuum