CeramTec North America, LLC.
CeramTec North America, LLC.
Mailing Address:
One Technology Place
Laurens, SC 29360

Tel: 864-766-5240
Email: sales@ceramtec.com
Website: https://shop.ceramtec.us
Print Back
Thermocouples are widely used to measure the temperature inside a vacuum or pressure chamber. CeramTec's thermocouple feedthroughs, manufactured with thermocouple materials or compensating material, transmit through the wall of the chamber the electromotive force (emf) generated by the application of heat to the thermocouple bead without introducing error.
MIL-C-5015 Type Thermocouples
Weld Installation MIL-C-5015 Type Thermocouple (910084-05-W) - 2
Unit of Measure
Items Weld Installation MIL-C-5015 Type Thermocouple - 2
10084-05-W
Weld Installation MIL-C-5015 Type Thermocouple 		Weld Installation MIL-C-5015 Type Thermocouple - 2
11342-08-W
Weld Installation MIL-C-5015 Type Thermocouple 		Weld Installation MIL-C-5015 Type Thermocouple - 2
11343-07-W
Weld Installation MIL-C-5015 Type Thermocouple 		International Organization for Standardization (ISO) Flange Installation MIL-C-5015 Type Thermocouple
18008-02-KF
International Organization for Standardization (ISO) Flange Installation MIL-C-5015 Type Thermocouple 		International Organization for Standardization (ISO) Flange Installation MIL-C-5015 Type Thermocouple
17155-02-KF
International Organization for Standardization (ISO) Flange Installation MIL-C-5015 Type Thermocouple
Description N/A Thermocouples are widely used to measure the temperature inside a vacuum or pressure chamber. CeramTec's thermocouple feedthroughs, manufactured with thermocouple materials or compensating material, transmit through the wall of the chamber the electromotive force (emf) generated by the application of heat to the thermocouple bead without introducing error.
Brands N/A Ceramaseal®
Installation N/A Weld N/A Weld N/A Weld N/A International Organization for Standardization (ISO) Flange N/A International Organization for Standardization (ISO) Flange
Installation Size N/A N/A N/A N/A NW16KF N/A NW16KF
Flange Size N/A
American National Standards Institute (ANSI) Type N/A K
Temperature Range N/A -269 to 450 ºC
T/C Pairs N/A 3 N/A 5 N/A 10 N/A 3 N/A 5
Thermocouple Materials N/A Alumel Chromel
Shell Material N/A 304 Stainless Steel
Insulation Material N/A Alumina Ceramic
Magnetic Material N/A true
Pressure at 20 Degree Celsius (ºC) Temperature N/A 400 psi28 bar N/A 350 psi24 bar N/A 125 psi8.6 bar N/A N/A
Extreme/Custom Design N/A
  • 940-pin feedthrough using thermocouple materials
  • Sub D connectors using thermocouple materials
  • Single pair high-temperature cable end seal in a special plug design
  • Type E, J and N thermocouples
Applications N/A A few of the many applications in which these thermocouples are commonly used are:
  • Furnaces
  • Power generation measurement and control
  • Aerospace equipment
  • In-vacuum coating
  • Semiconductor processing equipment
  • Energy research
  • Industrial equipment
  • Telecommunications
  • Semiconductor
  • Analytical Equipment
  • Oil Exploration
  • R & D
  • High Energy Physics
  • Military/Defense
  • Biotechnology
New Products N/A
  • Multipin spade type thermocouples
  • Single conductor thermocouples in spade and loop type
  • Thermocouples now available in ISO KF flanges
Additional Information N/A External instrumentation can then evaluate the strength of the emf that is proportional to the temperature at the thermocouple bead, thus yielding a temperature measurement. The Ceramaseal® thermocouple feed throughs provide the necessary electrical isolation and a hermetic seal.

For refractory and noble metal thermocouples, Ceramaseal® products use compensating wires. The junction between the compensating wires and the true thermocouple conductor material must be thermally shielded and not exceed 250 ºC.
Accessories N/A Part Number - 15911-02-A
ANSI Type - K
Thermocouple Materials - Chromel/Alumel
H Dimension - 1.4 in [36 mm]
L Dimension - 4.4 in [112 mm]
T/C Pairs - 3

Part Number - 15912-02-A
ANSI Type - K
Thermocouple Materials - Chromel/Alumel
H Dimension - 1.4 in [36 mm]
L Dimension - 4.4 in [112 mm]
T/C Pairs - 5

Part Number - 15913-02-A
ANSI Type - K
Thermocouple Materials - Chromel/Alumel
H Dimension - 1.9 in [49 mm]
L Dimension - 4.3 in [109 mm]
T/C Pairs - 10

Part Number - 11259-05-X
Type - Crimp
Material - Chromel
Minimum Temperature - -269 ºC
Maximum Temperature - 350 ºC
Groove - Yes

Part Number - 11259-06-X
Type - Crimp
Material - Alumel
Minimum Temperature - -269 ºC
Maximum Temperature - 350 ºC
Groove - No

Part Number - 2840-05
Type - Crimp Tool
Note N/A Thermocouple contacts are included with all plugs.