CeramTec North America, LLC.
CeramTec North America, LLC.
Mailing Address:
One Technology Place
Laurens, SC 29360

Tel: 864-766-5240
Email: sales@ceramtec.com
Website: https://shop.ceramtec.us
Print Back
An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
30 Kilovolt (kV) Direct Current (DC) Voltage Rating, 4 Ampere (A) Conductor Current Rating, and 1 to 2 Pins Fluted High Voltage Feedthroughs
Unit of Measure
Items 30 Kilovolt (kV) Direct Current (DC) Voltage Rating, 4 Ampere (A) Conductor Current Rating, and 1 to 2 Pins Fluted High Voltage Feedthroughs
6530-03-W
1 Pin Weld Installation Fluted High Voltage (HV) Feedthrough 		1 Pin International Organization for Standardization (ISO) Flange Installation Fluted High Voltage Feedthrough
17100-01-KF
1 Pin International Organization for Standardization (ISO) Flange Installation Fluted High Voltage (HV) Feedthrough 		1 Pin ConFlat Flange Installation Fluted High Voltage Feedthrough
16729-03-CF
1 Pin ConFlat Flange Installation Fluted High Voltage (HV) Feedthrough 		2 Pin Weld Installation Fluted High Voltage Feedthrough
6532-05-W
2 Pin Weld Installation Fluted High Voltage (HV) Feedthrough 		2 Pin International Organization for Standardization (ISO) Flange Installation Fluted High Voltage Feedthrough
17103-03-KF
2 Pin International Organization for Standardization (ISO) Flange Installation Fluted High Voltage (HV) Feedthrough
Description N/A An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall. Feedthroughs are sometimes referred to as 'pass-throughs'.
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
Direct Current (DC) Voltage Rating N/A 30 kV
Conductor Current Rating Per Pin N/A 4 A
Temperature Range N/A -269 to 450 ºC N/A -25 to 205 ºC N/A -269 to 450 ºC N/A -269 to 450 ºC N/A -25 to 205 ºC
Pressure at 20 Degree Celsius (ºC) Temperature N/A 250 psig17 bar N/A N/A 250 psig17 bar N/A 250 psig17 bar N/A
Number of Pins N/A 1 N/A 1 N/A 1 N/A 2 N/A 2
Conductor Material N/A 304 Stainless Steel
Housing Material N/A 304 Stainless Steel
Pin Material N/A 304 Stainless Steel
Insulation Material N/A Alumina Ceramic
Magnetic Material N/A true
Installation N/A Weld N/A International Organization for Standardization (ISO) Flange N/A ConFlat Flange N/A Weld N/A International Organization for Standardization (ISO) Flange
Installation Size N/A N/A NW40KF N/A NW35CF N/A N/A NW40KF
Flange Size N/A N/A N/A 2-3/4 in N/A N/A
Welding Type N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A N/A N/A Electron Beam (E-Beam) Welding Laser Welding Pulse-Tungsten Inert Gas (TIG) Welding Tungsten Inert Gas (TIG) Welding N/A
Additional Information N/A In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate:
  • High temperatures
  • Cryogenic temperatures
  • High pressure
  • Aggressive chemicals
A feedthrough is basically defined by the requirements for installation, insulation, and conductor material. The method of interconnection is flexible and left to the customer’s discretion. A selection of push on contacts can be found in the Accessories section of this catalog.
Extreme/Custom Design N/A
  • Multiple feedthrough flange assemblies
  • 940-pin header assembly
  • Corona-free designs to 180 kV DC
  • Currents in excess of 2,500 Amps
  • Pressures to 30,000 psig
Applications N/A A few of the many applications in which these feedthroughs are commonly used are:
  • Semiconductor processing equipment
  • Particle accelerators
  • Furnaces
  • Analytical equipment
  • In-vacuum coating
  • Satellite instrumentation
  • X-ray detection equipment
New Products N/A
  • New high-density, low current feedthroughs
  • Micro & Mini HV (high voltage) feedthroughs with mating air side cable assemblies
  • 40 & 50 kV feedthroughs with mating air side cable assemblies
  • 0.154 & 0.250 Power Plugs for safe high voltage and high current connectivity
Accessories N/A Part Number - 7429-01-A
Description - Accepts wire up to 0.050 [1.3]
Material - Beryllium Copper
Type - 0.094 Set Screw Type Contacts

Part Number - 7332-04-A
Description - Accepts wire up to 0.094 [2.4]
Material - Beryllium Copper
Type - 0.094 Barrel Type Contacts

Part Number - 2840-05
Description - For 0.025 to 0.075 in. Crimp Diameters
Type -Crimp Tool

Contacts priced and sold in packages of 10.
Features N/A Accelerators Cryogenics Fusion High Current High Energy Physics High Temperature High Voltage Laser Technology Microwave Nuclear Photovoltaic Semiconductor Equipment Superconductivity Ultra-High Vacuum